Planetary Concrete Mixer for Sale
Planetary concrete mixer is smarter in design, occupy less floor area, and is convenient for users to arrange in various production lines. Vertical shaft planetary concrete mixer is is suitable for various construction sites and can meet the individual production needs of different users.
- 0.25-3.0m3per batch as options
- Used in different industries
- Can mix dry and wet material
What Is Planetary Concrete Mixer
Concrete planetary mixer is a kind of concrete mixer with a vertically installed mixer doing planetary motion in a fixed tank. The material is added from the top and discharged from the bottom of the tank. Multiple discharge doors can be opened, and the large-sized inspection door is more convenient to use. The vertical shaft planetary mixer has strong mixing capacity, which can achieve higher production capacity of aggregates with different particle sizes and specific gravity without segregation. The stirring track is continuous and smooth without damaging the material.
Planetary concrete mixers can serve many industries, especially refractory materials and high-performance concrete industries. Even under harsh production conditions, the equipment runs equally stably, with low maintenance costs and high processing efficiency.
What Are Excellent Performances of Concrete Planetary Mixer
Wide range of applications. Planetary mixers are widely used in construction, civil and industrial projects such as production of concrete, dry mortar and steel fiber reinforced concrete among other industrial applications. At the same time, in the prefabricated component industry, it is also widely used in formulations such as concrete blocks, colored concrete, high-performance concrete or self-compacting concrete.
Stir without dead ends. The planetary concrete mixer for sale in HAMAC is equipped with an adaptive wall knife, which can scrape off the materials stuck on the wall.
Stir evenly and run efficiently. The working method of the concrete planetary mixer is to increase the shear force of the mixer by planetary mixing, which can enrich the types of mechanical mixing, reduce the mixing resistance and make the mixing more uniform and efficient.
High stirring efficiency. The number, shape, area, and angle of the mixing blades of the concrete planetary mixer can be changed according to the viscosity of the material to efficiently adapt to the mixing work of the material.
High structural stability. The working mode of planetary stirring combines the performance of adjustable stirring speed. The uniformity of stirring can be controlled. The mixing combination of materials is more uniform. And the structure of the new stirring materials formed has high stability.
The equipment is durable and wears little. First of all, in terms of the material of the mixer, the use of thick and heavy wear-resistant steel can guarantee the service life of the mixer in the case of poor working environment. Secondly, the bottom and wall of the mixer are equipped with wear-resistant lining plates, which are made of wear-resistant metal sheets. Thirdly, the operation mode of the planetary concrete mixer determines that the mixer will not have problems such as shaft head leakage and mixing arm breakage that have a direct impact on the life of the mixer.
The unloading operation is convenient and the unloading is clean. The discharge door of the planetary type concrete mixer can be set at multiple points.
Low running noise. Compact structure, low noise, high torque, superior performance, stable and reliable.
Safe and reliable operation. The concrete planetary mixer is with PCL control system, visual operation. The system has two modes of automatic or manual operation, and the formula, mixing time and other values can be directly modified through the operation panel. The motor can be automatically disconnected and equipped with an emergency stop switch near the mixer for safe operation.
Easy maintenance. This kind of concrete mixer is equipped with an observation door with a quick lock, which is convenient for observing the mixing process of materials. The inspection door is used for maintenance and replacement of spare parts, and the wear-resistant liner at the bottom of the machine, stirring blades and scrapers on the wall and bottom are easy to replace.
Technical Parameters of Planetary Concrete Mixer For Sale in HAMAC
|Diameter of mixing Trough(mm)||1300||1540||1900||2192||2496||2796||3100||3400||3400|
|mm Dimension (L*W*H)||1570 x1480 x1750||1862 x1850 x1855||2220 x2071 x1880||2550 x2295 x2195||2893 x2606 x2217||3223 x2906 x2425||3625 x3235 x2630||3893 x3555 x2695||3893 x3555 x2975|
FAQ - More About Concrete Planetary Mixer
Stirring device. It is made of high wear-resistant surfacing materials for the lining plate and mixing blades for different mixing materials, nickel-chromium alloy casting, and imported wear-resistant plates. The specially designed stirring device makes the stirring speed faster, the stirring is more uniform, and there is no stacking phenomenon.
Transmission device. The specially developed transmission device can balance and effectively distribute the power of the mixer to each mixing device to ensure efficient and low-noise operation of the mixer equipment.
Hydraulic unloading device. The hydraulic unloading system in the hydraulic unloading device is equipped with a manual door opening device, which can be opened manually in the event of a power failure.
Inspection door. The safety limit switch and key safety control device in the inspection door avoid the potential safety hazard of wrong startup of the machine during inspection.
Discharge door. The discharge door is equipped with a limit switch, and the size of the door opening can be set according to the needs.
In addition, in order to meet the high requirements of different industries for waterway devices, the planetary mixer adopts a spiral solid cone nozzle, which forms a fine and uniform atomization effect, which is more conducive to the mixing of materials.
The mixing arm pushes the materials ahead to move forward. The materials to be stirred are circularly circulated and convected in the horizontal plane by the centrifugal force. At the same time, the extrusion and shearing forces generated by the relative movement between materials also have upward movement. The material behind the mixing arm fills the gap left in the front, and the material moves downward by gravity. In this way, the mixture has both horizontal movement and vertical movement. From a microscopic point of view, it is more conducive to breaking the agglomeration of cement particles, so that cement molecules can be more fully combined with water molecules, and truly achieve microscopic uniformity.
Its stirring motion track is a motion track curve with high stirring efficiency and high stirring homogeneity without dead angle. This process belongs to the speed-up mode. The stirring is fast and labor-saving. And the trajectory curve belongs to a progressive and denser structure. So the mixing uniformity is high and the stirring efficiency is high.
- The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
- The fastening of various transmission systems, drive systems and other devices, the layout of feeding systems and gears are complete, and safety measures are in place.
- The wiring of relevant equipment is correct and will not cause safety hazards
- Regularly check whether the corresponding parts need to be filled with lubricating oil.
- Replace the wearing parts in time, and adjust the equipment to return to normal state in time.
- Perform an idling test run to make sure there is no abnormality.
During operation, pay attention to abnormal conditions and excessive temperature rise of some components. Once a problem occurs, it should be stopped for inspection and repaired until it is normal.
During use, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
Before the ascending operation, open the vent valve first, so that the inside of the mixing tank is at normal pressure. After reaching the raised position, the safety bolt needs to be plugged in.
After vacuuming, close the ball valve of the barrel first, then open the small normal pressure recovery valve, it is best to close the vacuum pump.
When the mixer is vacuuming, it is necessary to check whether the material barrel and the cover are flat, whether the material port cover is tightly closed. Pay attention: do not extend your hands into the mixer, otherwise it may pose a threat to people’s life safety.
After the operation of each machine is completed, it must be cleaned in time, the equipment should be lubricated, and the power supply should be cut off.
Please fill in the below information. Your information will be kept strictly confidential and will not be used for any purpose other than our business
EMAIL: [email protected]
ADD: 57th, Kexue Avenue, National HI-TECHIndustrial Development Zone, Zhengzhou,China.